Dishwashers - How much detergent to use in my dishwasher?

Applies to

  • Dishwashers

Solution

The amount of detergent you need to use depends on whether you have hard or soft water. To determine the proper amount, follow these tips:

  • If you are using dishwasher packs or tablets, use only one at a time.
  • If you’ve selected a quick or fast cycle, add the detergent pack or tablet in the tub so it dissolves during shorter cycles.
  • For powder, gel and liquid detergents, consult your Owner’s Manual, which lists the correct amount of detergent for degree of water conditions.
  • To determine your water hardness, contact your water supplier or have your water tested by an outside source (such as a company that sells water treatment equipment).

For best results, follow these tips for detergent use:

  • Make sure the detergent is fresh. When it’s old or expired, it might not dissolve properly.
  • Store detergent in a cool, dry place.
  • When loading the dishwasher, be sure that the detergent dispenser can open freely (not blocked by a dish/pan, etc) and that water from the spray arm can reach the open dispenser.
  • Because most detergents are designed to dissolve and activate at 120°F, your dishwasher will perform best if your water temperature is 120°F or higher at the start of a wash cycle.

TIP: Feel free to check your water heater setting. You may also run hot water from the kitchen faucet prior to starting the dishwasher.

Was this article helpful?