Delivery and Installation Guide - Refrigerator

Issue

• How do I prepare for my Refrigerator

Applies to

• Refrigerator

Solution

• Double check the installation space. Measure the dimensions (height, width, and depth) of the location where the unit will be placed. Any adjacent walls or cabinets will require 3-4 inches (depending upon model) of extra space in the width for the doors to fully open.
  
• For refrigerator installation with an icemaker and/or ice and water dispenser: A working shut-off valve connected to a ¼-inch stainless steel water line must be located within 6 feet of the appliance and be on the same floor.
  
• If a shut-off valve is not available, is corroded or the existing water supply line will not accept a ¼-inch stainless steel water line, the delivery team will be unable to uninstall and remove the existing product. Teams are also unable to remove an existing refrigerator with a copper or plastic water supply line attached.

Built-in Refrigerator Checklist

• If you have purchased a dual trim kit, please note that our installation teams can only install it if you have purchased a matching set of a single-door refrigerator and single-door freezer along with a pairing kit. If your refrigerator and freezer were purchased together, a pairing kit is included.
  
• If you have purchased a single-door refrigerator or freezer but not the pair and require a trim kit, please ensure you have purchased a single (not dual) trim kit.
  
• When in doubt, you can call the call center at 800-669-6779 to ensure all items needed for your installation are accounted for.