Stone-Baked Pizza - Shield Guide
Issue
- How to install your Pizza Shield
- How do I clean my Pizza Shield
- Where do I store my Pizza Shield
- Can the shield be used in other ovens?
Applies to
- Stone-Baked Pizza Oven
- Pizza Shield
Solution
How to install your Pizza Shield

STEP 1: Make sure the oven is completely cooled before adjusting the position of the oven rack and Pizza Shield.
STEP 2: Place Pizza Shield with Pizza Stone on the oven rack at the rack position 7. Check the rack position number on the left side of the oven’s front frame. Align the two notches on the back of the Pizza Shield to secure to the oven rack.
NOTE: Wall oven models will use rack position 5, please refer to your Owner's Guide for more information.
STEP 3: Use the included Pizza Stone as it fits perfectly into the Pizza Shield dimensions.

Can the Pizza Shield work in other models?
- The Pizza Shield is designed and intended to only be used in our Stone-Baked Pizza models.
- We strongly encourage not to use in any other ovens.
How to Remove and Clean your Pizza Shield
STEP 1: Wait at least one hour before removing the Pizza Shield use protective gloves or oven mitts to remove.
STEP 2: Lift Shield and Stone together, using incorporated handles on side, as the Stone is not attached.
STEP 3: Sweep off the ashes with a soft brush and discard (do not to use water or chemicals on the pizza shield).
STEP 4: Once removed, flip the Pizza Shield upside down and store it inside the bottom drawer of your appliance with the back of the Shield toward the front of the drawer.
